Pulp Alley cards for Gingerbread Men and Snowmen goons

I've been working on a campaign for Pulp Alley set around Christmas time and based on a famous franchise. As such I needed some Gingerbread Men and Snowmen goons. That meant that I also needed some cards for the miniature's profiles. So, here is my take on them for the campaign.

Gingerbread Goons

A Gingerbread Brute

Snowmen Goons

I've added one too many Abilities to the Snowmen than is officially allowed but it just feels right for snowmen to be able to hide in the snow. I've also made them able to reanimate as they can draw from the snow around them to repair minor damage.

You will notice that there are also a bunch of Abilities that don't match up with the Pulp Alley core rulebook. These abilities have been made for a campaign I've been drafting of late. So, you will just have to wait for me to post those Abilities as part of the actual campaign rules when I've finished them.

But if you want to try these out for yourself you can just ignore the strange Abilities for now.

One more thing. Here is an updated Slimer profile card.

Enjoy!

The Ginger's - a Gingerbread Man gang for Pulp Alley

 

These rather nice and gentle looking Gingerbread Men are a vicious gang of thugs from the War in Christmas Village set of miniatures. I'm planning on ganging them up for Pulp Alley and I have a particular scenario in mind for these lads.

So, with Christmas around the corner, and yesterday reaching 37 degrees Celsius, "let it snow, let it snow, let it snow..."

I'll try working up some Pulp Alley Adventurer Cards for these and post them in the future.

Slimer & the Gruesome Twosome Pulp Alley cards

Spud, aka Slimer

Work as once again gone nuts. But in my spare time, I have been experimenting with some campaign rules for Ghostbusters, Pulp Alley style. The campaign has specific rules that permit the Ghostbusters to detect, wrangle and capture ghosts as well as fight animated objects. The rules are still in their draft form, given I haven't had much time to write, paint or craft of late, but I thought I would show the cards for two of the ghosts in the campaign.

Ghosts have PKE rather than Health. PKE functions the same as Health on normal characters in Pulp Alley, however PKE can only be damaged by a proton stream or proton grenade.

Once a ghost's "health" (i.e. its PKE) is reduced to its Down state, the Ghostbuster can undertake the Ghost Wrangle Challenge on the ghost's card to drag the ghost into a ghost trap's capture cone. Failure sees the ghost immediately escape 1d8 inches in a random direction. Ghostbusters must spend an action to drop a ghost trap on the table (or pick it up again). A Ghostbuster can attempt the Ghost Wrangle Challenge in the same turn that he takes the ghost Down. Ghost can regain PKE at the end of the Turn in exactly the same way characters can with their health. A proton packs' stream is 12 inches, so as long as the Ghostbuster is within 12 inches of a trap, he can attempt to wrangle a Down ghost into the trap.

So here is Slimer's and The Gruesome Twosome's cards for Pulp Alley.

A Gruesome Twosome ghost

More mini's for this still to paint, and some more cards to make too. Hopefully work will ease off soon.

Ghostbusters Terror Dogs (from Zombicide)

 

Vinz Clortho and Zuul

Hmm, what do we have here? A couple of Terror Dogs. Vinz Clortho and Zuul. This must be heralding something bad. And just before Christmas too.

These two good little puppies are from Zombicide. I picked them up some years back on eBay. Very nice sculpts and bigger than the ones in The Real Ghostbusters boardgame. Meaner looking too.

They were base coated in a grey primer and then I used a blue ink for the whole model with the exception of the mouths. Once that was dry, I then did a dark grey drybrush, followed by a lighter grey drybrush to bring out their normal skin colour. Their mouths were done in a red ink over the grey primer. It took a couple of washes to get the colour I wanted. The eyes are done in Citadel Scab Reb, if I remember correctly. Very simple and didn't take long to do.

Aww...pretty red eyes. How cute.

Still more minis to paint before this little adventure can go down. Back to the painting table.

Christmas terrain for wargaming - part 2

 

So, on a 32-degree day here in Oz, when the wind is howling and the bushfire threat is ever present, its finally snowed on my Christmas terrain.

That's right. I have managed to finish off my Christmas terrain that I showed off in my last post. Yes, amazed reader. I have finally finished a single project! I know. I'm amazed too.

This terrain will be making its way to my gaming table soon enough. Now there's some painting of miniatures left to do.

Christmas terrain for wargaming

 

The local Christmas World shop opened the other weekend and as I was browsing I came across some nice miniature Christmas trees meant for a Christmas Village display. I had other ideas!

Following the method I posted about the other day (see here), I grabbed some 10cm diameter round MDF bases from Bunnings and created four more vegetation bases for my next foliage efforts.

Yes, that's PVA glue on the base still drying. I didn't sneeze on those bases.

The bases were sprayed with light brown spray as in the previous post's method. But I also did a very light zenith spray of white. This sets the tone of the winter base before I added the trees.

Currently, these are still a work in progress. Once the PVA glue dries with the stones, I'll add dobs of PVA and then sprinkle snow basing material over the base and stones. I want this to look like a dusting of snow rather than heavy snowfall.

These vegetation terrain bases I plan to use for role playing and for a future Pulp Alley scenario I'm working on. But more on that in a future post.

Easy Vegetation Terrain for wargaming

 

I'm sure others have discussed this before. But I wanted to highlight a really simple way of making thick vegetation terrain for your tabletop. I'm going to use these for our current Pirate Borg roleplaying campaign.

The church is from Sarissa Precision and is a 28mm scale Mediterranean Church

Aquarium and table setting plants pulled apart and ready for use

I started with finding a suitable sized base and, using PVA glue, sanded it. Once dry, I undercoated it in a light brown spray.

I then took cheap aquarium plastic plants and plastic table setting plants and pulled them apart. I then hot glued a random assortment of plant types and colours onto the base. Being hot glue, I had to hold each plant in place as I waited for the glue to dry. I also pulled off the strings of dried glue as I went.

I then used PVA glue to add small gravel stones to the base. Once those were dry, I then added some small grass flock around the base to hide some of the more obvious areas of the dried hot glue.

Just added the grass flock to the base of this one

So pretty cheap and pretty versatile. You can make whatever you want from such plants. You could even use the tiny fern like plants, which come from an aquarium plastic plant, to make corral polyps for underwater terrain.

So, there you go. I'm not the first to come up with this idea. But hope this gives you some inspiration for making cheap vegetation for your own tabletop.